Meppen, DEU

1X Bow Saw 24" • 1 X Hedge Shear 10" • 1 X Telescopic Lopping Shear 25"

7+1 DRAWER 298 TOOLS; 80PCS SOCKET SET 1/4" • 3/8" • 1/2"; 102PCS BIT SOCKET SET; 16PCS PLIER AND HAMMER AND CHISEL SET; 18PCS T

52CC; 2 DRILLS • 100 AND 200mm

1 X Gravity Spray Gun • 1 X HVLP Spray Gun • 1 X Micro Air Pencil Grinder • 1 X Air Brush Kit

to fit 12 - 35 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 5 - 13 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 16 - 40 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 16 - 40 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 5 •5 - 12 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 5 •5 - 12 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 5 •5 - 12 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to suit 10-18 ton excavator • hydraulic flow range 80-110 L/min • copy of declaration of confirmity available • 820kg

Trench drain system Caste iron gate (L-50cm X W-22 •5cm (42 parts)

to fit 18 - 36 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

Qty. of Meter units • Seed fingers • Seed tube W sensor (62 units).

to fit 18 - 36 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 3 •5 - 9.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 3 •5 - 9.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to suit skid steer • mix capacity 300-350 lit. • Oil flow (l/min) 40-90 • operating pressure (bar) 240 • weight 520 kg

to suit 4-6 ton excavator • mix capacity 200-240 lit. • Oil flow (l/min) 40-80 • operating pressure (bar) 200 • weight 370 kg

to fit 1.5 - 5.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

2x 380/70R24 • 2x 480/70R34

2x 460/85R30 - 2x 520/85R46

HHG3140 MS 55" (1400mm) Tilt Ditch Bucket • Digging Buckets HTL380 31" (800mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

to suit 18-28 ton excavator • with 80mm pin system (wide 300mm • pin to pin 450mm) • Impulse (t/kN) 11/111 • Oil flow (l/min) 120-170 • operating pressure (bar) 150-200 • weight (kg) 900

HGL3120 MS 47" (1200mm) Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

Fertilizer coulters liquid fertilizer Tubes 1 x Tires 23X10.50-12 (unused) 2x Tires 10.0/80-12 (unused)

HGL3140 MS 55" (1400mm) Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

Pronto Disk Tiger Bracket Tiger arm for disk Cylinder Ball hicth Diverse PTO parts Diverse Axle parst

2x 20.8R42 • 2x 480/70R30 to fit Claas Tractor