Moerdijk, NLD

to fit 5.5 - 13.5 ton excavators • weight 465kg with hydraulic rotation

Complete Set • Incudes Turbine/Wings/Computers/Accessories

to fit 5.5 - 13.5 ton excavators • weight 465kg with hydraulic rotation

to fit 5.5 - 13.5 ton excavators • weight 980kg with hydraulic rotation

to fit 5.5 - 13.5 ton excavators • weight 750kg with hydraulic rotation

to fit 5.5 - 13.5 ton excavators • weight 750kg with hydraulic rotation

E3/L3 • TL

to fit 4 - 12 ton excavators • weight 450kg with hydraulic rotation

70 mm Pin Diameter • 430 mm Center of Pin Boss to Center of Pin Boss • to fit Cat M315F

to fit 3.2 - 9.5 ton excavators • weight 265kg with hydraulic rotation

OQ70/55 • 2204KG

CE Marked.

with auger to suit 1 •5-4 ton excavator • copy of declaration of confirmity available

with auger to suit 2-4 ton excavator • copy of declaration of confirmity available

CE Marked.

to fit 5.2 - 11.5 ton excavators • weight 430kg • oil flow 65-100 l/min working pressure 130 bar • diameter tool 95mm

6 Cylinder Diesel Engine

Fits 6-11 Ton Excavator • Hydraulic Flow Range 40-90 L/min • Copy of CE Available • 450kg • CE Marked.

to fit 15 - 30 ton excavators • oil flow 105-145 l/min working pressure 160 bar • diameter tool 117mm

to suit 10-18 ton excavator • hydraulic flow range 80-110 L/min • copy of declaration of confirmity available • 820kg

to fit 8.2 - 16.5 ton excavators • oil flow 75-115 l/min working pressure 140 bar • diameter tool 100mm

to fit 8.2 - 16.5 ton excavators • oil flow 75-115 l/min working pressure 140 bar • diameter tool 100mm

to suit 4-8 ton excavator • hydraulic flow range 40-70 L/min • copy of declaration of confirmity available • 320kg

to fit 1.5 - 4.5 ton excavators • weight 155kg with hydraulic rotation

to fit 1.5 - 4.5 ton excavators • weight 155kg with hydraulic rotation

to fit 1.5 - 4.5 ton excavators • weight 155kg with hydraulic rotation

2020 US EPA Label

2020 US EPA Label

to fit 1.5 - 4.5 ton excavators • weight 150kg • oil flow 20-35 l/min working pressure 130 bar • diameter tool 50mm

to fit 2.7 - 5.5 ton excavators • weight 200kg • oil flow 25-45 l/min working pressure 130 bar • diameter tool 60mm

to fit 1.5 - 4.5 ton excavators • weight 150kg • oil flow 20-35 l/min working pressure 130 bar • diameter tool 50mm

to suit 1 •5-3 ton excavator • hydraulic flow range 15-30 L/min • copy of declaration of confirmity available • 120kg

to suit 2 •5-4 •5 ton excavator • hydraulic flow range 25-50 L/min • copy of declaration of confirmity available • 200kg

Fits 1 •5-4 Ton Excavator • Hydraulic Flow Range 23-30 L/min • Copy of CE Available • 150kg • CE Marked.

CNH Part # 1x 84294151

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 101kg

to suit 2-5 ton mini excavator • closing force 23kN • opening width 1200mm • weight (with rotator) 170kg

to suit 2-5 ton mini excavator • closing force 23kN • opening width 1200mm • weight (without rotator) 100kg

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 451kg

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

to suit 3 •5-10 ton excavator • with load holding valve • closing force 29kN • opening width 1206mm • weight 280kg

230mm • 300mm • 450mm • 900mm