Meppen, DEU

to fit 3 •5 - 9.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to fit 3 •5 - 9.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to suit skid steer • mix capacity 300-350 lit. • Oil flow (l/min) 40-90 • operating pressure (bar) 240 • weight 520 kg

to suit 4-6 ton excavator • mix capacity 200-240 lit. • Oil flow (l/min) 40-80 • operating pressure (bar) 200 • weight 370 kg

to fit 1.5 - 5.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

HHG3140 MS 55" (1400mm) Tilt Ditch Bucket • Digging Buckets HTL380 31" (800mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

to suit 18-28 ton excavator • with 80mm pin system (wide 300mm • pin to pin 450mm) • Impulse (t/kN) 11/111 • Oil flow (l/min) 120-170 • operating pressure (bar) 150-200 • weight (kg) 900

Fertilizer coulters liquid fertilizer Tubes 1 x Tires 23X10.50-12 (unused) 2x Tires 10.0/80-12 (unused)

HGL3120 MS 47" (1200mm) Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

HGL3140 MS 55" (1400mm) Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

Pronto Disk Tiger Bracket Tiger arm for disk Cylinder Ball hicth Diverse PTO parts Diverse Axle parst

to fit Terex TA27 Dumper

to suit 1 •5-3 ton excavator • copy of declaration of confirmity available

148A8/B

with auger to suit 1 •5-4 ton excavator • copy of declaration of confirmity available

to suit 3 •5-10 ton excavator • with load holding valve • closing force 29kN • opening width 1206mm • weight 280kg

to suit 1-2 ton mini excavator • closing force 8 •5kN • opening width 894mm • weight (with rotator) 50kg

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 451kg

R1; A-350

to suit 2-5 ton mini excavator • closing force 23kN • opening width 1200mm • weight (without rotator) 100kg

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 103kg

with auger to suit 2-4 ton excavator • copy of declaration of confirmity available

148A8/B

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

to suit 3-7 ton excavator • copy of declaration of confirmity available

to suit 2-5 ton mini excavator • closing force 23kN • opening width 1200mm • weight (with rotator) 170kg

to suit 1-2 ton mini excavator • closing force 8 •5kN • opening width 894mm • weight (without rotator) 50kg

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

150A8/150B

to suit 1 •5-4 ton excavator • copy of declaration of confirmity available

to suit 1 •5-4 ton excavator • hydraulic flow range 23-30 L/min • copy of declaration of confirmity available • 150kg

to suit 2 •5-4 •5 ton excavator • hydraulic flow range 25-50 L/min • copy of declaration of confirmity available • 200kg

to suit 6-11 ton excavator • hydraulic flow range 40-90 L/min • copy of declaration of confirmity available • 450kg

to suit 2 •5-4 •5 ton excavator • hydraulic flow range 25-50 L/min • copy of declaration of confirmity available • 200kg

to suit 2 •5-5 •5 ton excavator • hydraulic flow range 30-60 L/min • copy of declaration of confirmity available • 280 kg

to fit 5.2 - 11.5 ton • weight might not be accurate to model / Gewicht kann vom Model abweichen

to suit 1 •5-4 ton excavator • hydraulic flow range 23-30 L/min • copy of declaration of confirmity available • 150kg

to suit 1 •5-2 •5 ton excavator • hydraulic flow range 15-30 L/min • Copy of declaration of confirmity available 100 kg

to suit 1 •5-2 •5 ton excavator • hydraulic flow range 15-30 L/min • Copy of declaration of confirmity available 100 kg

to suit 1 •5-3 ton excavator • hydraulic flow range 15-30 L/min • copy of declaration of confirmity available • 120kg

to suit 1-3 ton mini excavatorno rotation • with load holding valve • closing force 10kN • opening width 850mm • weight 103kg

to suit 1 •5-3 ton excavator • hydraulic flow range 15-30 L/min • copy of declaration of confirmity available • 120kg

to suit 3-8 ton mini excavator • 600 mm blade • oil flow 40-75 l/min • weight 77 kg

39" (1000mm) to suit 1-2 ton mini excavator • without adapter

39" (1000mm) to suit 1-2 ton mini excavator • without adapter

55" (1400mm) Ditch Bucket • to suit 3-4 ton mini excavator with MS03