Australia National Unreserved Auction, AUS

6 cyl 2.5 L Petrol Engine • Automatic Transmission • Air Conditioner • Power Windows • Power Locks • Dual Sun Roof

Ball Hitch • 5.00-10 Tires

Deutz 2 Cylinder Diesel Engine • 630 mm Drums

5.20-10 Tires

Deutz 2 Cylinder Diesel Engine • 850 mm Drums

Ball Hitch • 5.20-10 Tires

E-Stops • 2005 US EPA Label • Hatz 2G40 16 hp Diesel Engine • 850 mm Drums • Cordless Remote Control • w/ Battery Charger

Deutz 2 Cylinder Diesel Engine • 850 mm Drums

1820 mm Drum

Air Ride Suspension • Dumps to Right Side • 1600 mm Side Walls • Steel Body • 11R22.5 Tires • EBS • ATM 42.5 t

Air Ride Suspension • Dumps to Right Side • 1600 mm Side Walls • Steel Body • 11R22.5 Tires • EBS • ATM 42.5 t • 90 mm Kingpin

Spring Suspension • Steel Decking • 6.50R16LT Tires

Air Ride Suspension • Lift 1st- 3rd- Axles • 1600 mm Side Walls • Alloy Body • Electric Roll Tarp • Box Liner • 11R22.5 Tires • Airtec Load Scales • ATM 42 t

Air Ride Suspension • 1900 mm Side Walls • Alloy Body • Manual Roll Tarp • 11R22.5 Tires • Right Weigh Load Scales • ATM 32 t

Air Ride Suspension • 2200 mm Side Walls • Alloy Body • Manual Roll Tarp • 295/80R22.5 Tires • Airtec Load Scales • ATM 32 t

Drill Press • Grinder • Workshop Signs

Renegade Air Compressor • Tool Boxes

Air Ride Suspension • Alloy Tank • 4 Compartments • Catwalk w/Guardrails • 275/70R22.5 Tires • ATM 36 t

Quick Coupler Bracket • 90 mm Diameter Pins • 600 mm Center of Pin Boss to Center of Pin Boss • 450 mm Inside to Inside Pin Boss Spacing

100 mm Diameter Pins • 580 mm Center of Pin Boss to Center of Pin Boss • 430 mm Inside to Inside Pin Boss Spacing • Chisel & Moils

To Suit 18 - 25T Excavators • Maximum Opening: 1900mm • Weight: 1480Kgs • Required flow: 100-140Lpm • Pressure: 160-180Kg/cm2 • Pin Diameter: 75mm • Total Width Between the ears: 360mm • (Width with Boss fitted 324mm) Centre to Centre: 460mm • NOTE: Comes with Removable Boss allowing Pin size changes) • Shipping Dimensions: 2250mm L x 1225mm H x 1100mm W

80 mm Diameter Pins • 460 mm Center of Pin Boss to Center of Pin Boss • 355 mm Inside to Inside Pin Boss Spacing

45 mm Diameter Pins • 245 mm Center of Pin Boss to Center of Pin Boss • 150 mm Inside to Inside Pin Boss Spacing

To Suit 5-10T Excavators • Maximum Opening: 950mm • Weight: 380Kgs • Required Flow: 50-100LPM • Pressure: 150-170Kg/cm2 • Pin Diameter: 50mm • Total Width Between the ears: 260mm • (Width with Boss fitted 176 mm) Centre to Centre: 275mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 620mm L x 900mm H x 1220mm W

70 mm Diameter Pins • 380 mm Center of Pin Boss to Center of Pin Boss • 315 mm Inside to Inside Pin Boss Spacing

To Suit 5-10T Excavators • Weight: 3600Kgs • Maximum Opening: 420mm • Required Flow: 140-160 Lpm • Pressure: 240-260Kg/cm2 • Pin Diameter: 60mm • Total Width Between the ears: 230mm • (Width with Boss fitted 206 mm) Centre to Centre: 305mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 1400mm L x 890mm H x 530mm W

65 mm Diameter Pins • 375 mm Center of Pin Boss to Center of Pin Boss • 255 mm Inside to Inside Pin Boss Spacing

To Suit 12-16T Excavators • Maximum Opening: 1600mm • Weight: 930Kgs • Required flow: 90-110Lpm • Pressure: 150-170Kg/cm2 • Pin Diameter: 65mm • Total Width Between the ears: 302mm • (Width with Boss fitted 266mm) Centre to Centre: 380mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 2060mm L x 780mm H x 860mm W

To Suit 12-16T Excavators • Weight: 940Kgs • Maximum Opening: 600mm • Required Flow: 180-200 Lpm • Pressure: 260-280Kg/cm2 • Pin Diameter: 65mm • Total Width Between the ears: 330mm • (Width with Boss fitted 266mm) Centre to Centre: 430mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 1930mm L x 1330mm H x 700mm W

To Suit 3-5T Excavator • Maximum Opening: 1100mm • Weight: 350Kgs • Required flow: 30-55Lpm • Pressure: 110-140Kg/cm2 •Pin Diameter: 42mmm • Total Width Between the ears: 252mm • (Width with Boss fitted 168 mm) Centre to Centre: 230mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 1450mm L x 630mm H x 740mm W

To Suit 18-25T Excavators • Weight: 1630Kgs • Maximum Opening: 900mm • Required Flow: 220-260 Lpm • Pressure: 290-310Kg/cm2 • Pin Diameter:75mm • Total Width Between the ears: 360mm • (Width with Boss fitted 328 mm) Centre to Centre: 450mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 2245mm L x 1660mm H x 705mm W

Quick Coupler Bracket • 100 mm Stick Pin Diameter • 80 mm Link Pin Diameter • 460 mm Center of Pin Boss to Center of Pin Boss • 335 mm Inside to Inside Pin Boss Spacing • To suit ABS TD02-25T

65 mm Diameter Pins • 410 mm Center of Pin Boss to Center of Pin Boss • 270 mm Inside to Inside Pin Boss Spacing

To suit Cat 972L

To Suit 19-25T Excavators • Maximum Opening: 1540mm • Weight: 1140Kgs • Required Flow: 100-140LPM • Pressure: 160-180Kg/cm2 • Pin Diameter: 80mm • Total Width Between the ears: 370mm • (Width with Boss fitted 320 mm) Centre to Centre: 430mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 900mm L x 1350mm H x 1900mm W

To Suit 1-3T Excavators • Maximum Opening: 620mm • Weight: 155Kgs • Required Flow: 20-40LPM • Pressure: 80-110Kg/cm2 • Pin Diameter: 28mm • Total Width Between the ears: 140mm • (Width with Boss fitted 116 mm) Centre to Centre: 140mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 460mm L x 710mm H x 485mm W

90 mm Diameter Pins • 510 mm Center of Pin Boss to Center of Pin Boss • 380 mm Inside to Inside Pin Boss Spacing

To Suit 5-10T Excavators • Maximum Opening: 950mm • Weight: 380Kgs • Required Flow: 50-100LPM • Pressure: 150-170Kg/cm2 • Pin Diameter: 50mm • Total Width Between the ears: 260mm • (Width with Boss fitted 176 mm) Centre to Centre: 275mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 620mm L x 900mm H x 1220mm W

To Suit 3-5T Excavators • Maximum Opening: 800mm • Weight: 270Kgs • Required Flow: 30-55LPM • Pressure: 110-140Kg/cm2 • Pin Diameter: 42mm • Total Width Between the ears: 210mm • (Width with Boss fitted 160mm) Centre to Centre: 255mm • NOTE: Comes with Removeable Boss allowing Pin size changes) • Shipping Dimensions: 600mm L x 780mm H x 1070mm W

80 mm Diameter Pins • 460 mm Center of Pin Boss to Center of Pin Boss • 340 mm Inside to Inside Pin Boss Spacing